Fujitsu PRIMERGY BX600 Manuel de démarrage - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Fujitsu PRIMERGY BX600. Fujitsu PRIMERGY BX600 13 pages.

nInstalling the server to the rack

When installing or removing the server, please contact an

office listed in the "Contact Information".

Open the front and rear doors of the

rack.

Align rail with the length of the rack,

and temporarily fasten the rack using

screws.

��

Attach the rail to the rack.

Tighten the temporarily fastened screws from step

��

Install the chassis to the rack.

Place the chassis on the rail, slide it to the very

back and install to the rack.

��

Secure the chassis and rack.

When installing for the first time, be sure to slide the

chassis to the very back and secure it completely to the

rack.

Install a server blade or a dummy

server blade to the chassis.

Do not leave any server blade slot empty.

��

- When sliding or returning the chassis or server blade to

their original position, be careful not to pinch your fingers

and clothes. This may cause injury.

- The rack rail does not have a locking mechanism, be

careful not to drop the chassis when sliding it out.

- Do not install the BX620 S4 server blade in the BX600

S2 chassis' server blade slots 4, or 10.

Abnormal operation will occur.

- Attach the blank panels that come with the rack to

locations where no server or peripheral devices are

installed.

��