Fujitsu PRIMERGY BX924 S3 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu PRIMERGY BX924 S3. Fujitsu PRIMERGY BX924 S3 13 pages. Primergy

Imprimer la page
Fujitsu PRIMERGY BX924 S3 Manuel
E1
XII

Storage

Section
S26361-F4008-E3
BX924 S3 disk mount. kit (PCH)
1x
supports up to 2 SSDs
connected to onboard PCH
max. 1x per base unit
SSD SAS, MLC, 6Gb/s
100GB
200GB
1-2x
400GB
S26361-F5124-E100
SSD SATA 100GB, MLC
Solid State Disk
1-2x
SATA 6Gb/s
Mainstream Perfomance
non hot plug/hot replace
max. 1-2x per base unit
S26361-F3798-E100
HD SATA 6G 1TB 5.4K rpm
1x
ECO-SATA 6Gb/s, AF(512e)
non hot-plug
max. 1x per base unit
RAID Functionality on Server Blade
Section
S26361-F3674-E1
Onboard Controller SAS upgrade
LSI
Patsburg B
RAID 0, 1 & 10
no controller cache
SAS 3Gb/sec
4 internal ports
PCIe x4
no PCI slot required
max. 1x per system
F
System configurator and order-information guide
PRIMERGY BX924 S3
Both hard disks are plugged in directly connected to the onboard controller.
Two disks can be configured!
One UFM can be installed independent from the disk drives
Remark: UFM is part of the VMWare Embedded solution (S26361-F2341-E431)
Remark: Currently VMWare RAID configurations are only supported with the SAS
RAID Mezz Card and Disk mount kit (SAS RAID)
SSD/HDD LIMITATION
The second SSD only be configured with max. 115W CPUs
Support for 2x SSD and 115W CPUs needs MMB FW >= 5.02
Support for 1x HDD is possible and intended for HPC customer
No mixing of SAS and SATA SSDs allowed
S26361-F4008-E4
BX924 S3 disk mount. kit (SAS RAID)
supports up to 2 SSDs
connected to SAS RAID Mezz.
max. 1x per base unit
S26361-F4580-E100
S26361-F4580-E200
S26361-F4580-E400
S26361-F5124-E200
S26361-F5124-E400
SSD SATA 200GB, MLC
SSD SATA 400GB, MLC
Solid State Disk
Solid State Disk
SATA 6Gb/s
SATA 6Gb/s
Mainstream Perfomance
Mainstream Perfomance
non hot plug/hot replace
non hot plug/hot replace
max. 1-2x per base unit
max. 1-2x per base unit
This upgrade is only needed to drive SAS devices
with the onboard PCH chipset controller
Fujitsu PRIMERGY Server
Status: 2013-12-30
Using the S26361-F4008-E4
requires the SAS Mezz Card
and the SAS connection kit
6 of 13