Fujitsu PRIMERGY CX272 S1 Configurateur de système et manuel d'information sur les commandes - Page 4
Parcourez en ligne ou téléchargez le pdf Configurateur de système et manuel d'information sur les commandes pour {nom_de_la_catégorie} Fujitsu PRIMERGY CX272 S1. Fujitsu PRIMERGY CX272 S1 21 pages.
Imprimer la pageConfiguration diagram PRIMERGY CX272 S1
System unit ( I )
with up to 12x 3.5" or 2.5" HDDs for shared HDDs plus 2x internal HDDs for OS boot HDDs
Motherboard
Memory CPU1
( Channel A + B + C + D )
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory CPU2
( Channel E + F + G + H)
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory (III )
PSAS CP200i (SAS HBA)
For up to 12x SAS/BC SAS/SAS SSD
LSI SW Raid, Raid 0 / 1
Onboard for up to internal 2x SATA/SATA SSD
Slot 1 PCIe-3 x8, 390mm for PSAS CP200i
Slot 2 PCIe-3 x8, 390mm
Slot 3 PCIe-3 x8 for 10GbE card
Key:
Included in basic unit
The population order for the CPU is: CPU1 first, then CPU2
Xeon DP
Xeon DP
Processor ( II )
Option
Fujitsu Technology Solutions x86 PRIMERGY Serve
System configurator and order-information guide
PRIMERGY CX420 S1 / CX272 S1
CX400 Chassis parts
Rear side on each node
2 USB
1 VGA
2x LAN & Service LAN
Rear side
1. PSU
2. PSU
Hotplug power supply
Inside
Fan 1 - Fan 4
Non-Hotplug
included in Chassis
Front
Hard disk drives ( VI )
2.5"or3.5" SAS (shared HDD)
Up to shared 12x SAS HDDs/SSD
can be installed
in CX420 S1 chassis
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
2.5" SAS or dummy
Hard disk drives ( VI )
2.5" SATA (OS boot)
Up to 2 SATA HDDs/SSD
can be installed
in CX272 S1 node
2.5" SATA
2.5" SATA
Status 2013-12-30
4 of 21