Fujitsu PRIMERGY TX200 S7 Configurateur de système et manuel d'information sur les commandes - Page 13

Parcourez en ligne ou téléchargez le pdf Configurateur de système et manuel d'information sur les commandes pour {nom_de_la_catégorie} Fujitsu PRIMERGY TX200 S7. Fujitsu PRIMERGY TX200 S7 28 pages. Dual socket intel xeon processor tower server
Également pour Fujitsu PRIMERGY TX200 S7 : Fiche technique (10 pages)

Imprimer la page
Memory Configuration PRIMERGY TX200 S7
Each CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels.
If you need more than 6 Slots you have to configure the 2nd CPU.
Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below).
There are 2 different kinds of DDR3 Memory Modules available: UDIMM and RDIMM
UDIMM / RDIMM offer different functionality. Mix of UDIMM / RDIMM is not alloved.
If 1.5V and 1.35V DIMMs are mixed, the DIMMs will run at 1.5V
Mode
Configuration
SDDC (chipkill) support
any
Independant Channel
1, 2 or 3 Modules per Bank
Mode
Mirrored Channel Mode *) 2 identical Modules / Bank
Performance Mode
3 identical Modules / Bank
Rank Sparing Mode *)
min. 2 Ranks / Channel
*) For the delivery ex works the system will be prepared with dedicated BIOS setting.
Capacity
Configuration
Min. Memory per CPU
1 Module / CPU
Max. Memory per CPU
4/6 Modules / CPU
Max. Memory per System 8/12 Modules / System
Memory-Speed:
Max. DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU
The memory channel with the lowest speed defines the speed of all CPU channels in the system
Mem . Sp eed p r o vid ed
b y CPU
Voltage setting (BIOS)
CPU with 1600MHz DDR3 Bus
CPU with 1333MHz DDR3 Bus
CPU with 1066MHz DDR3 Bus
1R - Single Rank
2R - Dual Rank
1DPC = 1 DIMM per Channel
2DPC = 2 DIMM per Channel
Configuration hints:
- The memory sockets on the systemboard offer a color coding:
Bank I
black sockets
Bank II
blue sockets
- A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below)
Bank I on CPU 1/2
up to 3 memory modules connected to Channel A - F on the 1st/2nd CPU
Bank II on CPU 1/2
up to 3 memory modules connected to Channel A - F on the 1st/2nd CPU
- See below and next page for a detailed descriptions of the memory configuration supported.
UDIMM RDIMM
x8
no
yes
no
yes
no
UDIMM
1x2GB
6x4GB 6x16GB
48GB
Real maximum memory-bus speed depending on CPU type,
memory configuration (DPC) and voltage setting (BIOS)
UDIMM 1600MHz
1.5V [default]
1.35V
1
2
1
2
DPC
DPC
DPC DPC
1333
1066
1333
1066
1333
1333
1066
1066
1066
1066
1066
1066
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX200 S7
Application
RDIMM
x8
x4
no
yes
detect multi-bit errors
yes
yes
offers max. flexibility, upgradeability, capacity
use UDIMM modules for lowest cost
no
yes
offers maximum security
yes
yes
offers maximum performance and capacity
no
yes
balances security and capacity
RDIMM
Notes
1x4GB
with one CPU
with one CPU
96GB
if second CPU is configured
RDIMM 1600MHz
1.5V [default]
1.35V
1
2
3
1
2
DPC DPC DPC DPC DPC
1600
1600
-
1333
1333
1333
1333
-
1333
1333
1066
1066
-
1066
1066
Status 2014-01-30
13 of 28