Fujitsu SPARC Enterprise M3000 Notes sur le produit - Page 18
Parcourez en ligne ou téléchargez le pdf Notes sur le produit pour {nom_de_la_catégorie} Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38 pages.
Également pour Fujitsu SPARC Enterprise M3000 : Manuel de démarrage (8 pages), Manuel de sécurité et de conformité (34 pages), Notes sur le produit (42 pages)
Imprimer la page
■
Using the XSCF Web, when you import XCP or update the firmware, Session ID
■
error may be displayed on the web browser. And in the Autologout setting, when
you specify the timeout period as over 30 minutes, Internal Server Error might be
displayed when you perform the firmware update. Please close the current
browser and open the new browser to reconnect to XSCF Web.
When you use the XSCF Web, if a plug-in such as the search tool installed with
■
the browser, remove the plug-in or disable the pop-up blocking.
General Functionality Issues and Limitations
The log archive feature by the setarchiving(8) and the showarchiving(8)
■
commands, and the Log Archives menu of XSCF Web is not supported.
When you use the external power control interface of the external power
■
controller, the following notification signals are not supported:
■
■
You cannot use the following user account names, as they are reserved for system
■
use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap,
apache, ntp, admin, proxyuser, and default.
XSCF-LAN is compliant with auto-negotiation. When you connect XSCF-LAN
■
and the network device which has been fixed to the full-duplex mode, according
to the IEEE 802.3 rule, XSCF-LAN communicates in the half-duplex mode. Due to
this, network communication speed may slow down or communication error may
occur. Do not fail to set the network device which connects with XSCF-LAN to the
auto-negotiation mode.
At this time the restoredefaults(8) command is not supported.
■
At this time the -e, -l, -P options of the snapshot(8) command are not
■
supported.
10
SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010
Firefox 2
Type "about:config" in address box, then type "cache" in filter box. Change
the "browser.cache.check_doc_frequency" settings value to "1."
The OS panic or the server hardware error signal (*CPUN/RTNU)
The server hardware error signal (power fail, temperature error, and fan error)
(*ALARM)