Fujitsu SPARC Enterprise T2000 Notes sur le produit - Page 12
Parcourez en ligne ou téléchargez le pdf Notes sur le produit pour {nom_de_la_catégorie} Fujitsu SPARC Enterprise T2000. Fujitsu SPARC Enterprise T2000 28 pages.
Également pour Fujitsu SPARC Enterprise T2000 : Manuel de démarrage (2 pages), Manuel de démarrage (12 pages), Notes sur le produit (30 pages)
Imprimer la page
Hardware Installation and Service Issues
Notes on the Use of 200V Power Supply
For the servers that have the B-type plug, confirm that a 15A overcurrent protection
device is available outside the server. If one is not available, prepare an external 15A
overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or
fuses. The B-type plug refers to plugs other than grounding-type ones with two
parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
For details of the power cord type for your server, contact your authorized service
engineer.
General Functionality Issues
These are the functionality issues for this release.
RAID Function
A hardware RAID function is provided as standard in SPARC Enterprise T2000
servers. However, with regard to data protection, reliability, and serviceability,
Fujitsu does not support this function.
Fujitsu recommends use of software RAID functions for internal disks as specified
below:
PRIMECLUSTER GDS
■
Solaris Volume Manager (included in Solaris OS)
■
False IO-Bridge Errors May Be Reported at Startup
(CR 6792174)
This bug can occasionally cause POST to report a false PCIE-to-PCIX bridge chip
error the first time a system starts up. If this occurs, the system will reset. When it
restarts, POST will behave correctly.
4
SPARC Enterprise T2000 Server Product Notes • May 2010