Brother MFC MFC-5440CN Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother MFC MFC-5440CN. Brother MFC MFC-5440CN 44 pages. Brother internet fax user's guide
Également pour Brother MFC MFC-5440CN : Manuel d'installation rapide (37 pages), Manuel d'installation rapide (39 pages), Manuel d'entretien (8 pages)
Imprimer la page
Setup TCP/IP
This menu has nine sections: Boot Method, IP Address, Subnet
Mask, Gateway, Host Name, WINS Config, WINS Server, DNS
Server and APIPA.
BOOT Method
1
Menu/Set
Press
1
1 for
,
FAX-1940CN/MFC-5440CN)
2
Press
or
3
Menu/Set
Press
4
Stop/Exit
Press
Static mode
In this mode the machine's IP address must be manually assigned.
Once entered the IP address is locked to the assigned address.
Auto mode
In this mode, the machine will scan the network for a DHCP server,
if it can find one, and if the DHCP server is configured to allocate an
IP address to the machine, then the IP address supplied by the
DHCP server will used. If no DHCP server is available, then the
machine will scan for a BOOTP server. If a BOOTP server is
available, and it is configured correctly, the machine will take its IP
address from the BOOTP server. After it is initially powered ON, it
may take a few minutes for the machine to scan the network for a
server.
5
1
1
,
,
,
for MFC-3340CN/MFC-5840CN. (
to select Auto, Static, RARP, BOOTP or DHCP.
.
.
CONTROL PANEL SETUP 1 - 2
4
,