Fujitsu fi-4530C Procédure d'installation

Parcourez en ligne ou téléchargez le pdf Procédure d'installation pour {nom_de_la_catégorie} Fujitsu fi-4530C. Fujitsu fi-4530C 5 pages. Image scanner
Également pour Fujitsu fi-4530C : Pour commencer (27 pages), Manuel de procédures d'installation (7 pages), Manuel de procédures d'installation (9 pages), Brochure & Specs (2 pages), Procédures d'installation (3 pages), Instructions de remplacement et de nettoyage des consommables (14 pages), Manuel d'instructions de nettoyage (13 pages), Instructions de nettoyage (2 pages), Manuel d'instruction (10 pages)

M3093GX\DG\M3096G\GX\M3097G+\DG

Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI

Step A: Required hardware.

To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum)

Narrow SCSI cable.

Step B: Removing the shipping bracket.

It is recommended that before you connect the scanner to your computer that you inspect the

scanner and remove the shipping bracket first.

Removing the shipping bracket: The flatbed scanner models typically come with a

factory installed shipping lock designed to protect the scanner during shipment. Before

the scanner can be used the shipping lock must be unlocked. Follow these instructions

to unlock the shipping bracket:

1. Slide the scanner to its side as shown in figure below.

2. Unscrew the retainer screw and remove the shipping bracket.

3. Place the shipping bracket in the "use position" slot and secure it with the retainer

screw (see figure below)

Place scanner back in its normal position

Win95\98\ME Installation Procedure

Rev052104A