Fujitsu FI-4860C2 Instructions de nettoyage

Parcourez en ligne ou téléchargez le pdf Instructions de nettoyage pour {nom_de_la_catégorie} Fujitsu FI-4860C2. Fujitsu FI-4860C2 2 pages. High speed colour duplex scanner
Également pour Fujitsu FI-4860C2 : Spécifications (2 pages), Spécifications (2 pages), Instructions de nettoyage (2 pages)

Imprimer la page

BEFORE CLEANING

Remove documents from the stacker.

Pull up the lever on the right front of

the upper transport and raise it.

Cleaning the Pad -

Pull the ADF release lever towards you

and lift up the ADF upper sheet guide.

Guide Plate

Cleaning the Pick Roller -

While pulling the ADF lever towards you,

lift up the ADF upper sheet guide.

ADF Upper Sheet Guide

ADF

Release

Lever

Parts

Pad

Pick Roller

Brake Roller

Cleaning Kit

Note: Please ensure Cleaner F2 is NOT

used on Rubber Rollers.

Recommended Cleaning Cycle Every 300,000 Sheets

Press down on the upper part of the

guide plate with your fingers at the

two positions shown, rotate the plate

towards you and remove it.

Pad Assy

Recommended Cleaning Cycle Every 300,000 Sheets

Slide the Pick Roller unit to the left to

disengage the clutch ring from the shaft.

Ring

Shaft

Cleaning Instructions for

fi-4860C2 Scanner

Part Number

For further cleaning

CA04315-G730

instructions please

CA03296-F711

CA04315-F705

SC-CLE-KIT2

Scanner Operators

which can be found on

www.fel.fujitsu.com/scanner

Wipe the translucent rubber part of

the pad ASSY using cleaning paper

moistened with cleaner F1.

Pad (Cleaning Area)

Guide

Plate

Wipe both Pick Rollers (2 positions)

and the Separation Roller using

cleaning paper moistened with F1

Pick Roller Unit

cleaner.

refer to the

fi-4860C2 Image

Guide

our Website:

Pad

Assy

Ring

Separation

Roller

Pick Roller Unit