Brother MFC-7550MC Manuel de configuration - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Brother MFC-7550MC. Brother MFC-7550MC 48 pages. Fax, printer and copier
Également pour Brother MFC-7550MC : Liste de référence des pièces (16 pages)
Imprimer la page
3. SOFTWARE SETTINGS
A. TELEPHONE
FUNCTION
SE'IVI'INGS
There are some settings,
such as the date and time, you should set on yum machine
before you begin using it. Once entered,
these settings
will remain in the machine
until you change them. You can begin customizing
the settings by pressing Function
on the control panel. This activates
the function mode and On-Screen
Programming
prompts. You can complete a variety of settings
in this mode.
(This chapter
(TELEPHONE
FUNCTION
SETTINGS)
is also inserted
in the
Operations
Manual.
Please refer to the Operations
Manual
page 3-1-11
for more
information.)
Setting
the Dialing
Mode (Tone/Pulse)
Your machine supports
both tone (multi-frequency)
and pulse (rotary) dialing. It is
initially set to TONE, so you do not have to change the setting if you use that kind of
line. If you are using a pulse dial line, you can change the setting
to PULSE by
following the steps below:
i|:l:l m_]I,_!'._'ILq! _:l:[eJ',¥
1.
Press Function.
You will see scrolling
options
on the
display. You can choose one.
(The MFC 4550 will skip to Step 4.)
2. Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3, Press 1,
(Only for MFC 6550MC/7550MC)
4. Press 6.
oo:oo ]
L
NO
(Only for MFC ( m
FAX
*"
....
:
6550MC/
[_-"
.....
,t
!
;,: • ; t
7550MC
(Onlyfor MFC
6550MC/
7550MC)
5. Press 1.
After two seconds you will be prompted to
select pulse or tone.
6. Press -_ (left arrow) or D,_ (right arrow)
to find thb*' dialing
mode that matches
your telephone
line.
Exhmple: PULSE.
IUI
III
II
I
II
I
3-1