Fujitsu FI-5530C2 Manuel de démarrage - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Fujitsu FI-5530C2. Fujitsu FI-5530C2 11 pages. Image scanner
Également pour Fujitsu FI-5530C2 : Pour commencer (28 pages), Manuel de procédures d'installation (6 pages), Spécifications (2 pages), Manuel de démarrage (27 pages), Instructions de nettoyage (2 pages), Instructions de nettoyage (2 pages), Pour commencer (11 pages)

Chapter2

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to section 7.2

"Installation Specifications" of "fi-5530C2 Oper-

ator's Guide" on the Setup DVD-ROM.

2. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the figure below.

The Side guides of the ADF paper chute have to

face up.

ADF paper chute

Side guide

3. Connect the AC adapter.

Use only the AC adapter provided by the

ATTENTION

manufacturer.

1) Connect the AC cable to the AC adapter.

INSTALLATION OF THE SCANNER

Tab

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

AC cable into the outlet.