Fujitsu fi-5650C Nettoyage et entretien - Page 15

Parcourez en ligne ou téléchargez le pdf Nettoyage et entretien pour {nom_de_la_catégorie} Fujitsu fi-5650C. Fujitsu fi-5650C 39 pages. Image scanner
Également pour Fujitsu fi-5650C : Manuel de procédures d'installation (7 pages), Manuel de procédures d'installation (9 pages), Procédures d'installation (3 pages), Spécifications (2 pages), Brochure & Specs (2 pages), Manuel de démarrage (40 pages), Manuel d'instruction (11 pages), Instructions de remplacement et de nettoyage des consommables (19 pages), Instructions de nettoyage (2 pages)

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

5.1 Consumable and replacement cycle

5.2 Replacing the brake roller

5.3 Replacing the pick roller set

6 TROUBLESHOOTING

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

5.2 Replacing the brake roller

1. Remove all documents from the ADF paper chute.

2. Open the ADF cover by pushing down the ADF button.

3. Open the brake roller holder and remove the brake roller.

4. Remove the brake roller from its shaft.

5. Install a new roller to the shaft aligning the protrusion on the shaft to the slot on the brake roller.

6. Close the brake roller holder.

7. Push the center of the ADF cover to close it until the ADF button is locked.

8. Reset the Brake Roller counter. For details on resetting, refer to

CAUTION

Be careful not to pinch your fingers with the ADF cover.

Do not close the ADF cover when the Brake Roller Holder is opened.

ATTENTION

Confirm that the Brake roller is firmly installed. If not, it may cause feeding errors such as double-feeding.

"7.6 Resetting the consumable

counters".