Fujitsu FI-6130 Manuel de démarrage - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Fujitsu FI-6130. Fujitsu FI-6130 20 pages. Color duplex workgroup scanners
Également pour Fujitsu FI-6130 : Brochure & Specs (2 pages), Manuel d'instruction (10 pages), Pour commencer (23 pages), Nettoyage et entretien (47 pages), Instructions de nettoyage (2 pages)
Imprimer la page
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business Division,
Products Group
Solid Square East Tower, 580 Horikawa-cho, Saiwai-
ku, Kawasaki-shi Kanagawa 212-8563, Japan
Phone : (81-44) 540-4538
All Rights Reserved. Copyright © PFU LIMITED 2007
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or
an authorized FUJITSU Image Scanner service
provider to make repairs to this product.
Warning Indications Used In This Manual
This indication alerts operators to an
ARNI N G
operation that, if not strictly observed,
may result in severe injury or death.
This indication alerts operators to an
AUTION
operation that, if not strictly observed,
may result in safety hazards to
personnel or damage to equipment.
Symbols Used In This Manual
This symbol alerts operators to particularly
important information. Be sure to read this
ATTENTION
information.
This symbol alerts operators to helpful advice
regarding operation.
HINT
A TRIANGLE symbol indicates that special care
and attention is required.
The drawing inside the triangle shows the
specific caution.
A CIRCLE with a diagonal line inside shows
action which users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
Outline characters on a colored background show
R
instructions users should follow.
It may also include the drawing that shows the
specific instruction.
Warning Label
The glass surface inside the ADF becomes hot
during the operation. Be careful not to touch the
glass surface inside the ADF.
ATTENTION
Do NOT remove from the scanner, stain or scratch the
warning labels.
iii
Screen Examples In This Manual
The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen differs
from the screen examples in this manual, operate by
following the actual displayed screen while referring to
the User's Manual of the scanner application you are
using.
The screenshots in this manual were captured from
FUJITSU TWAIN32 scanner driver, ScandAll PRO
Image Capturing Utility Software, FUJITSU ISIS
scanner driver, QuickScan Pro™ image capturing
software and Adobe Acrobat.
■ Safety Precautions
ARNI N G
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull,
bend, twist, heat, damage or modify AC cables.
Do not use damaged AC cables or power plugs, or
install any cables or power plugs to loose wall
sockets.
Use only specified AC cables and connector
cables.
Use only specified AC cables and connector cables.
Failure to use the correct cables might cause electric
shock and/or equipment failure.
Please don't use the AC cable provided with this
scanner for other devices, since this might cause
equipment failure and other troubles or an electric
shock.
Make sure to ground the scanner.
Make sure to ground to avoid electric shock.
Be sure to ground before plugging into a power outlet.
Unplug from the outlet before removing the ground
connection.
Use this scanner only at the indicated power
voltage. Do not connect to multiple-power
strips.
Use this scanner only at the indicated power voltage
and current. Improper power voltage and current
might cause fire or electric shock. Do not connect to
multiple-power strips.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so
might cause electric shock.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the power plug
or metal fittings with a soft, dry cloth. Accumulated
dust might cause fire or electric shock.
Do not install the device in locations that
has oil smoke, steam, humidity, and dust.
Do not install the scanner in locations subject to oil
smoke, steam, humidity, and dust. Doing so might
cause a fire or electric shock.
Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn the
scanner off and unplug the power cable. Contact the
store where you purchased the scanner.