Fujitsu fi-6670 Series Instructions de remplacement et de nettoyage des consommables - Page 15

Parcourez en ligne ou téléchargez le pdf Instructions de remplacement et de nettoyage des consommables pour {nom_de_la_catégorie} Fujitsu fi-6670 Series. Fujitsu fi-6670 Series 22 pages. Image scanner
Également pour Fujitsu fi-6670 Series : Manuel de l'utilisateur (26 pages), Manuel de procédures d'installation (6 pages), Brochure (2 pages), Spécifications (2 pages), Manuel de démarrage (14 pages), Manuel de démarrage (26 pages)

Imprimer la page
Fujitsu fi-6670 Series Instructions de remplacement et de nettoyage des consommables
C
ADF (
LEANING THE
CONT
C
ADF R
LEANING THE
OLLERS
Dirty ADF Rollers will cause frequent jams.
•
Clean the two sets of
Urethane Rollers with a lint
free cloth moistened with F1
Cleaner or isopropyl alcohol.
Both of these sets of rollers
are located on the top section
of the ADF.
Note:
To properly clean the complete surfaces of the rollers hold down the
[S
] and S
Buttons on the Operator Panel simultaneously. The
ENT TO
CAN
rollers will rotate to a new position.
[Scan] Button
[Send to] Button
Function
Scan / Stop
Check
Send to
fi-6670(A)
•
Clean the two sets of Plastic Rollers with a lint free cloth moistened
with F1 Cleaner or isopropyl alcohol. Both of these sets of rollers are
located on the bottom section of the ADF.
C
T
P
LEANING THE
RANSPORT
Dirty Sheet Guides can cause paper jams, and also damage or mark the
paper. Dirty Glass Areas can cause image quality problems such as
vertical streaking, or faded image.
•
Wipe the two glass areas
(upper and lower), and the
two sheet guides with a lint
free cloth moistened with F1
Cleaner or isopropyl alcohol.
fi-6670(A) & fi-6770(A) C
.)
Plastic Rollers
Check
Function
Send to
Scan / Stop
Power
Power
fi-6770(A)
ATH
R
ONSUMABLE
EPLACEMENT AND
Urethane Feed Rollers
[Send to] Button
[Scan] Button
Glass Areas
Sheet Guides
C
I
LEANING
NSTRUCTIONS
15