Fujitsu fi-680PRF Manuel de l'opérateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Fujitsu fi-680PRF. Fujitsu fi-680PRF 26 pages. Imprinter
Imprimer la page
2.5 Replacing the Print Cartridge
Replace the print cartridge as follows.
CAUTION
Before replacing the print cartridge, make sure that
you turn off the scanner power and unplug the
power cable from the outlet. Otherwise, it may
cause electric shock or malfunction.
Do not use print cartridges other than those
specified. Using a non-specified print cartridge may
cause malfunction.
Be careful not to get your fingers caught when
replacing the print cartridge.
If a message appears to notify that remaining ink
！ ！
！
amount is small, replace the print cartridge
immediately.
If you continue to print without replacing the
cartridge, your print output continues to appear
lighter and lighter.
When installing a print cartridge, make sure to
install it in the correct orientation.
For how to operate the scanner, refer to the
"fi-6400/fi-6800 Image Scanner Operator's
Guide".
For inquiries on or purchase of print cartridges,
contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
■ Front-Side Imprinter
1
Make sure that the scanner power cable is
unplugged from the outlet.
2
Push up the top cover release tab with your fingers
to open the top cover.
3
Lift the output feeder unit.
4
Move the print cartridge holder to a location where a
print cartridge can be installed easily.
5
Open the print cartridge holder cover.
1
Press the release tab to release the lock.
2
Open the cover to the left.
6
Remove the print cartridge.
16