Fujitsu fi-7460 Manuel d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Fujitsu fi-7460. Fujitsu fi-7460 18 pages. Consumable replacement and cleaning instructions

Imprimer la page

fi-7480 / fi-7460

If you find the counts are close to or over 200,000 and cleaning doesn't

resolve a feeding issue it might be time to replace the consumables.

1. Checking and resetting the Sheet Counters After Consumable Replacement

a. Start up the Software Operation Panel (SOP)

b. From the listing on the left, Select "Device Setting"

c. Resetting the sheet counters

d. Click the "Clear(2) button for "Brake Roller" -> the counter is reset to "0"

e. Click the "Clear(3) button for "Pick Roller" -> the counter is reset to "0"

If the glass surface or the rollers are still dirty after they are wiped with a dry cloth, use a cloth moistened

with 90% or higher Isopropyl Alcohol. As the scanner continues to feed documents, paper dust will

accumulate inside the ADF and it may cause scanning errors. Cleaning should be performed

approximately every 5,000 sheers scanned.



The glass inside the ADF can be very hot when the scanner is being used. Before you start

cleaning the inside, make sure to turn off the power, unplug the power cable and wait at least 15

minutes for the inside of the ADF to cool down.

Note -



Do not use water or mild detergent to clean the ADF



When using Isopropyl Alcohol, use small quantities. Excessive amount of alcohol may take a

while to dry



Do not us alcohol on the plastic frame. It may deteriorate the frame

ONSUMABLE

EPLACEMENT AND

LEANING

NSTRUCTIONS