Brother DCP-8110DN Manuel de l'utilisateur avancé - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother DCP-8110DN. Brother DCP-8110DN 50 pages. Quick setup guide - english
Également pour Brother DCP-8110DN : Manuel (36 pages), Manuel du réseau (29 pages), Manuel (27 pages), Manuel d'installation rapide (23 pages), Manuel de l'utilisateur (23 pages), Manuel de sécurité des produits (23 pages), Manuel de l'utilisateur avancé (39 pages), Manuel de sécurité des produits (22 pages)

Cleaning the scanner

Turn off the machine's power switch.

Disconnect all cables, and then unplug

the power cord from the AC power

outlet.

(DCP-8155DN) Unfold the ADF

document support (1) and then open the

ADF cover (2).

Clean the white bar (3) and the scanner

glass strip (4) underneath it with a soft

lint-free cloth moistened with water.

Close the ADF cover (2) and fold the

ADF document support (1).

Lift the document cover (1).

Clean the white plastic surface (2) and

scanner glass (3) underneath it with a

soft lint-free cloth moistened with water.

In the ADF unit, clean the white bar (1)

and the glass strip (2) underneath it with

a soft lint-free cloth moistened with

water.

Note

In addition to cleaning the scanner glass

and glass strip with a soft lint-free cloth

moistened with water, run your finger tip

over the glass to see if you can feel

anything on it. If you feel dirt or debris,

clean the glass again concentrating on

that area. You may need to repeat the

cleaning process three or four times. To

test, make a copy after each cleaning.

Close the document cover.