Brother DCP-8110DN Manuel de l'utilisateur avancé - Page 44

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother DCP-8110DN. Brother DCP-8110DN 50 pages. Quick setup guide - english
Également pour Brother DCP-8110DN : Manuel (36 pages), Manuel du réseau (29 pages), Manuel (27 pages), Manuel d'installation rapide (23 pages), Manuel de l'utilisateur (23 pages), Manuel de sécurité des produits (23 pages), Manuel de l'utilisateur avancé (39 pages), Manuel de sécurité des produits (22 pages)

Imprimer la page

Brother DCP-8110DN Manuel de l'utilisateur avancé

Optional paper tray

(LT-5400)

An optional lower tray can be installed on the

DCP-8150DN and DCP-8155DN, and it can

hold up to 500 sheets of 20 lb / 80 g/m

paper.

When an optional tray is installed, the

machine can hold up to 800 sheets of plain

paper.

For setup, see the Instructions that we have

supplied with the lower tray unit.

WARNING

If you use a Lower Tray, DO NOT carry the

machine with the Lower Tray as you may

be injured or cause damage to the machine

because it is not attached to the Lower

Tray.

Memory board

DCP-8110DN and DCP-8150DN have 64 MB

of standard memory, and DCP-8155DN has

128 MB. All models have one slot for optional

memory expansion. You can increase the

memory up to maximum of 320 MB for

DCP-8110DN and DCP-8150DN, and 384

MB for DCP-8155DN by installing one

SO-DIMM (Small Outline Dual In-line

Memory Module).

SO-DIMM Types

For information regarding memory for your

Brother machine please visit us at:

http://www.brother-usa.com/support/memory/

In general, the SO-DIMM must have the

following specifications:

Type

CAS latency

Clock

frequency

Capacity

Height

DRAM type

Note

• There might be some SO-DIMMs that will

not work with the machine.

• For more information, call the dealer you

bought the machine from or Brother

Customer Service.

144-pin and 16-bit output

267 MHz (533 Mb/S/Pin) or

256 MB

1.18 in. (30.0 mm)

DDR2 SDRAM