Brother DCP-8155DN Manuel de l'utilisateur avancé - Page 45

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother DCP-8155DN. Brother DCP-8155DN 50 pages. Quick setup guide - english
Également pour Brother DCP-8155DN : Manuel (36 pages), Manuel du réseau (29 pages), Manuel (27 pages), Manuel d'installation rapide (23 pages), Manuel de l'utilisateur (23 pages), Manuel de sécurité des produits (23 pages), Manuel de l'utilisateur avancé (39 pages)

Installing extra memory

Turn off the machine's power switch.

Disconnect the interface cable from the

machine, and then unplug the power

cord from the AC power outlet.

Note

Be sure to turn off the machine's power

switch before you install or remove the

SO-DIMM.

Remove the plastic (1) and then

metal (2) SO-DIMM covers.

Unpack the SO-DIMM and hold it by its

edges.

Important

To prevent damage to the machine from

static electricity, DO NOT touch the

memory chips or the board surface.

Hold the SO-DIMM by the edges and

align the notches in the SO-DIMM with

the protrusions in the slot. Insert the

SO-DIMM diagonally (1), then tilt it

toward the interface board until it clicks

into place (2).

Put the metal (2) and then the plastic (1)

SO-DIMM covers back on.

Options