Fujitsu ScanPartner 620C Manuel de l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu ScanPartner 620C. Fujitsu ScanPartner 620C 28 pages. Image scanner
Également pour Fujitsu ScanPartner 620C : Spécifications (2 pages), Instructions de remplacement et de nettoyage des consommables (7 pages), Procédures d'installation (5 pages)

Question:

While scanning, the scanner often makes noises, or it scans back and forth.

Answer:

Choose a lower speed from the TWAIN user interface for a low speed PC.

Question:

The scanned image is too dark.

Answer:

a) Use your application to modify the Gamma setting to 2.2 and 1.8 for your

printer and monitor respectively.

b) Use the Brightness setting from the TWAIN user interface to get a brighter

image.

Question:

Line art is too thick when scanned from the original.

Answer:

Use the Brightness or Threshold setting to adjust the line art image.

4.2 PAPER JAM IN THE ADF

In the event of paper jam, please follow the procedures below.

i).

Press the ADF Release Button at the front left of the scanner as shown in Figure 4-1. The

ADF cover will be released.

ii).

Open the ADF cover to the full open position as shown in Figure 4-2.

iii).

Pull the paper out of the ADF unit carefully.

Figure 4-1 ADF Paper Jam - Opening the ADF.

ADF Cover

ADF Release Button

4-3