®
Windows
Installation
■ Software
You can install the following software.
ScanSnap Manager (Scanner driver)
ScanSnap Organizer (File management application)
CardMinder (Business card management application)
ABBYY FineReader for ScanSnap
Install other software bundled with the ScanSnap as needed.
For details about each software and its installation procedures, refer to "Installing the Software" in the
Operator's Guide.
■ System Requirements
For the latest information on requirements, please visit the ScanSnap Support Site at:
http://scansnap.fujitsu.com/g-support/en/
Operating system
CPU
Memory
Display resolution (*4)
Hard disk space (*5)
USB port
*1 : The software bundled with the ScanSnap operates as a desktop application.
*2 : Service Pack 2 or later is required.
*3 : Service Pack 3 or later is required.
*4 : When the font size is large, some screens may not be displayed properly.
In that case, use a smaller font size.
®
*5 : For Windows
8, Windows Vista
installed, a maximum of 500 MB of additional free hard disk space is required for it.
*6: Some computers do not recognize the ScanSnap when it is connected to a USB 3.0 port.
For the latest information on USB 3.0, please visit the following web page:
http://scansnap.fujitsu.com/g-support/en/
ATTENTION
If the system requirements above are not satisfied, the ScanSnap may not operate.
Scanning speed will slow down in the following cases:
- The CPU or the memory does not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
The actual increase in used disk space after installation and the required disk space for installation may
differ from each other depending on your Windows
(OCR application)
™
®
Windows
8 (32-bit/64-bit) (*1)
®
Windows
7 (32-bit/64-bit)
®
Windows Vista
(32-bit/64-bit) (*2)
®
Windows
XP (32-bit) (*3)
®
Intel
Core
2 Duo 2.2 GHz or higher
™
(Recommended: Intel
32-bit: 1 GB or more (Recommended: 4 GB or more)
64-bit: 2 GB or more (Recommended: 4 GB or more)
®
Windows
8: 1024
768 pixels or higher
×
®
Windows
7/Windows Vista
4386 MB or more of free hard disk space
Additionally, 1 GB or more of free hard disk space is required for ScanSnap iX500
Deluxe (FI-IX500-D/FI-IX500-DC). For details, refer to the manuals for Rack2-Filer
Smart with Magic Desktop.
USB 3.0 (*6)/USB 2.0/USB 1.1
®
, and Windows
®
Core™ i5 2.5 GHz or higher)
®
®
/Windows
XP: 800
®
XP, if Microsoft
®
system disk management.
4
600 pixels or higher
×
®
.NET Framework 3.5 SP1 is not
Imprimer la page