Brother HL-2270DW Manuel de l'utilisateur du réseau - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur du réseau pour {nom_de_la_catégorie} Brother HL-2270DW. Brother HL-2270DW 47 pages. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Également pour Brother HL-2270DW : Manuel d'installation rapide (36 pages), Manuel d'installation rapide (36 pages), Manuel d'installation (5 pages), Manuel d'installation rapide (35 pages), Faq et dépannage (6 pages)

Imprimer la page

Brother HL-2270DW Manuel de l'utilisateur du réseau

Configuring your machine for a wireless network (For HL-2270DW)

How to configure your wireless machine, using the one-push wireless setting mode

Make sure that the power cord is plugged in.

Turn on the machine and wait until the machine is in the Ready state.

Press the wireless setup button located at the back of the machine for less than 2 seconds as shown in

the illustration below. This will put the machine in one-push wireless setting mode. This feature will

automatically detect which mode your WLAN access point/router uses for one-push configuration (Wi-Fi

Protected Setup or AOSS™).

Note

• Use a pointy object such as a ballpoint pen to press the button.

• If you press the button for 3 seconds or more, the machine will change to the PIN Method of the Wi-Fi

Protected Setup mode. See Using the PIN Method of Wi-Fi Protected Setup on page 18.

The machine starts the one-push wireless setting mode.

The machine will search for an WLAN access point/router that supports Wi-Fi Protected Setup or

AOSS™ for 2 minutes.

Put your WLAN access point/router in the Wi-Fi Protected Setup mode or AOSS™, depending on what

is supported by your WLAN access point/router. Please refer to the instruction manual supplied with your

WLAN access point/router.