Brother HL-2270DW Manuel de l'utilisateur du réseau - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur du réseau pour {nom_de_la_catégorie} Brother HL-2270DW. Brother HL-2270DW 47 pages. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Également pour Brother HL-2270DW : Manuel d'installation rapide (36 pages), Manuel d'installation rapide (36 pages), Manuel d'installation (5 pages), Manuel d'installation rapide (35 pages), Faq et dépannage (6 pages)

Imprimer la page

Brother HL-2270DW Manuel de l'utilisateur du réseau

Configuring your machine for a wireless network (For HL-2270DW)

Using a computer that is on the network, type http://access_point_ip_address/ into your

browser. (Where access_point_ip_address is the IP address of the device that is used as the

Registrar

) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN from the printed page

to the Registrar and follow the on-screen instruction.

The Registrar is normally the WLAN access point/router.

Note

The setting page is different, depending on the brand of WLAN access point/router. See the instruction

supplied with your WLAN access point/router.

Windows Vista

/Windows

If you are using your computer as a Registrar, follow these steps:

Note

• To use a Windows Vista

in advance. See the instruction supplied with your WLAN access point/router.

• If you use Windows

following the on-screen instructions. If you want to install the full driver and software package, follow the

steps in Quick Setup Guide for installation.

1 (Windows Vista

Click the

button and then Network.

(Windows

Click the

button and then Devices and Printers.

2 (Windows Vista

Click Add a wireless device.

(Windows

Click Add a device.

3 Choose your machine and click Next.

4 Input the PIN from the printed page and then click Next.

5 Choose your network that you want to connect to, and then click Next.

6 Click Close.

or Windows

7 computer as a Registrar, you need to register it to your network

7 as a Registrar, you can install the printer driver after the wireless configuration by

)