Fujitsu 200 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu 200. Fujitsu 200 8 pages. Harsh environment case for pencentra 130
Également pour Fujitsu 200 : Manuel de l'utilisateur (2 pages), Fiche technique (2 pages), Manuel de l'utilisateur (2 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (2 pages)

58-0581-01.fm Page 2 Tuesday, August 21, 2001 9:28 AM

Using the Battery Charger

To charge your battery pack(s) in the external battery

charger:

1. Connect an FPC DC power source such as AC Adapter

FMWAC4, FPCAC14, FPCAC23, or Auto/Airline

Adapter FPCAA02 to the DC input on the battery

charger. The Power status indicator on the charger turns

on indicating that external power is supplied to the

charger.

2. Insert the battery pack into one of the slots in the battery

charger as shown in the following figure until the

battery pack is firmly seated in the charger.

3. There are two status indicators on the battery charger,

one for each slot. The status indicators change colors to

represent different battery conditions, as noted in

Table 1.

When the battery charger is not in use, remove all batteries

and disconnect the DC power source.