Fujitsu eternus af Manuel de configuration - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu eternus af. Fujitsu eternus af 32 pages. Fibre channel for citrix xenserver
Également pour Fujitsu eternus af : Manuel de configuration (28 pages), Manuel de configuration (25 pages), Manuel de configuration (43 pages)
Imprimer la page
Chapter 8
Setting Up XenServer
8.1
Setting Up the Fibre Channel Cards
1
Perform the following driver parameter settings for each model of ETERNUS DX/AF that is to be connec-
ted.
Parameter
Connection Options
Data Rate
Frame Size
Hard Loop ID
Loop Reset Delay (seconds)
Enable Host HBA BIOS
Enable Hard Loop ID
Enable FC Tape Support
Operation Mode
Interrupt Delay Timer (100ms)
Execution Throttle
Login Retry Count
Port Down Retry Count
Enable LIP Full Login
Link Down Timeout (seconds)
Enable Target Reset
LUNs Per Target
Enable Receive Out Of Order Frame
*1: Use the following "Data Rate" setting values
Fibre
Channel
card
transfer
rate
32Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2
Add the following line to the /etc/modprobe.conf configuration file and set the QueueDepth value.
options qla2xxx ql2xmaxqdepth=X
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix
Setting value
QLE2560/QLE2562
0 (direct connection)
1 (switch connection)
(*1)
2048
0
5
Disabled
Disabled
Disabled
0
0
65535
8
30
Enabled
30
Enabled
128
Disabled
Switch connection
Fibre Channel switch transfer rate
32Gbit/s
16Gbit/s
8Gbit/s
6
5
4
5
5
4
4
4
4
—
3
3
22
Copyright 2017 FUJITSU LIMITED
Remarks
If the current parameter values are dif-
ferent, change them to the indicated
values.
Direct connection
CA transfer rate
4Gbit/s
2Gbit/s
32Gbit/s
—
—
6
3
—
5
3
1
4
3
1
—
16Gbit/s
8Gbit/s
4Gbit/s
5
4
—
5
4
3
4
4
3
3
3
3
®
®
XenServer
P3AM-4572-19ENZ0