Fujitsu ETERNUS DX Disk Manuel de configuration - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 28 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Chapter 7

Checking Connections

7.2

Setting Up the Server to Recognize the Logical Units

Check that all connected devices are listed in the ioscan output and "CLAIMED" is displayed in "S/W

State".

The following example shows the output of ioscan (LegacyView) when ETERNUS DX storage systems are

connected to a server.

# ioscan

H/W Path

============================================================

255/0

255/0/0.0

255/0/0.0.0

255/0/0.0.0.0

255/0/0.0.0.1

255/0/0.0.0.2

255/0/0.0.0.3

255/0/0.0.0.4

When the ETERNUS DX storage systems are connected for the first time, the device file (for exam-

ple, /dev/dsk/c4t0d0) sometimes may not be created.

If this happens, use the "insf" command to create the device file. Specify the hardware path name as

follows, and execute.

# insf -H hw_path_to_device -e

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

Class

iscsi

ext_bus

target

disk

Description

iSCSI Virtual Node

iSCSI-SCSI Protocol Interface

FUJITSU ETERNUS_DXL

P3AM-3402-14ENZ0