Fujitsu ETERNUS DX Disk Manuel de configuration - Page 41

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Chapter 10

Setting a File System

10.2

Setting Up Automatic Disk Mounting

When using the MPxIO with the Oracle Fibre Channel card or the Brocade Fibre Channel card

•

/dev/dsk/c7t6000B5D0006A0000006A010900620000d0s0 /dev/rdsk/c7t6000B5D0006A0000

006A010900620000d0s0 /mnt ufs 2 yes -

Specify the parameters in the "/etc/vfstab" file as shown below.

device to mount

•

Specify the block device.

device to fsck

•

Specify the raw device.

mount point

•

Specify the mount directory.

FS type

•

Specify the file system type. Normally "ufs" should be specified.

fsck pass

•

Specify whether and with what priority "fsck" should be performed.

•

mount at boot

Specify whether or not to auto-mount the device when the system is booted.

mount options

•

Specify the mount options. Normally "-" may be specified.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3702-16ENZ0