Fujitsu ETERNUS DX Disk Manuel de configuration - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 25 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page
Fujitsu ETERNUS DX Disk Manuel de configuration
Chapter 7
Setting Up the Fibre Channel Switches
Perform the settings required to connect the ETERNUS DX/AF storage systems and server via the Fibre Chan-
nel switch, according to "Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Set-
tings".
If the access path is set with ETERNUS SF Storage Cruiser, the Host Response settings are set to the default
values.
If the Host Response settings are changed from the default values, set the Host Response again.
The following examples show configurations in which a server is connected to a Fibre Channel switch with
zoning.
The following example shows a configuration for multiple servers.
ZONE1
Port0
Port1
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Name : Server#1
Port0
Port1
ZONE2
Port2
Port4
Port6
FC switch
Port3
Port5
Port7
Port0
Port1
CM0
ETERNUS DX/AF
Name : RAID#1
Copyright 2017 FUJITSU LIMITED
Name : Server#2
Port0
Port1
ZONE3
ZONE4
Port0
Port2
Port4
FC switch
Port1
Port3
Port5
Cascading
Port0
Port1
line
CM1
13
Port6
Port7
P3AM-6612-14ENZ0