Fujitsu ETERNUS DX Disk Manuel de configuration - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 25 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page
Fujitsu ETERNUS DX Disk Manuel de configuration
Chapter 8
Setting Up Oracle VM Server
8.2
Turning On the Devices
8.1.3

Creating an Initial RAM Disk

Create an initial RAM disk image file to match the kernel being used. Refer to manuals supplied with the
Fibre Channel cards for details.
8.1.4
Rebooting the OS
Reboot the OS.
8.2
Turning On the Devices
To turn on the connected devices, use the following procedure:
1
Turn on the Fibre Channel switch power (if used).
2
Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.
3
Turn on the ETERNUS DX/AF.
4
Check that the Ready LED is lit on the ETERNUS DX/AF.
5
Turn on the server.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
20
Copyright 2017 FUJITSU LIMITED
P3AM-6612-14ENZ0