Fujitsu ETERNUS DX Disk Manuel de configuration - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Chapter 7

Installing the Drivers

7.2

Multipath Environment Configuration

7.2.2

Standard Multipath Driver (msdsm) for Windows Server

This section describes how to configure the environment to use the standard multipath driver (msdsm) for

Windows Server

Server

2008 R2, and Windows Server

7.2.2.1

Installing Multipath I/O

Click [Add Features] in the [Server Manager] screen.

Select the "Multipath I/O" checkbox in the "Features" screen of the Add Features Wizard, and install the

Multipath I/O function.

Reboot the server.

7.2.2.2

Detailed Setup for MPIO

Perform settings to apply the installed Multipath I/O to the ETERNUS DX.

Click [Control Panel] — [MPIO].

The MPIO properties window appears.

2019, Windows Server

2016, Windows Server

2008.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows

2012 R2, Windows Server

2012, Windows

P3AM-3442-18ENZ0