Chapter 3
Storage System Monitoring
3.3
Displaying Status via ETERNUS CLI
Status of the ETERNUS DX is monitored periodically, and the result is displayed as a general status icon with
character strings.
Table 3.1 General Status of ETERNUS Web GUI
Status
For details, refer to "Configuration Guide (Web GUI)".
3.3
Displaying Status via ETERNUS CLI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked by send-
ing the status display command via ETERNUS CLI.
CLI> show status
Summary Status [Normal]
CLI> show status
Summary Status [Error]
CLI> show status
Summary Status [Warning]
The general status of the ETERNUS DX indicates whether an error status component or a warning status com-
ponent exists in the storage system.
Table 3.2 General Status of ETERNUS CLI
Status
Empty
Normal
Pinned Data
Unused
Warning
Maintenance
Error
Loop Down
Not Ready
Subsystem Down
Change Assigned CM
(green)
(red)
(red)
(orange)
(yellow)
Description
An undefined or uninstalled component exists in the ETERNUS DX.
The ETERNUS DX is in normal status.
Pinned data exists in the ETERNUS DX.
An undefined component is installed in the ETERNUS DX.
The ETERNUS DX contains a component that requires preventive maintenance.
The ETERNUS DX is under maintenance.
An error has occurred in a component that is installed in the ETERNUS DX.
The ETERNUS DX is in BackEnd Down status.
An abnormality is detected and access from the host cannot be received.
The ETERNUS DX cannot be used.
CM hot expansion recovery is required.
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Description
The ETERNUS DX is in normal state.
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
The ETERNUS DX is in error state.
The ETERNUS DX is under maintenance.
The ETERNUS DX is in warning state.
26
P3AM-8472-01ENZ0
Imprimer la page