Fujitsu Eternus DX200F Manuel d'utilisation - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 48 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Également pour Fujitsu Eternus DX200F : Manuel de configuration (10 pages), Manuel de configuration (28 pages), Manuel de configuration (13 pages), Manuel de configuration (16 pages), Manuel de configuration (38 pages), Précautions de sécurité (12 pages)

Imprimer la page
Fujitsu Eternus DX200F Manuel d'utilisation
Chapter 4
Maintaining Optional Products
4.2
Adding Servers
2
In [Action], click [Create].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered and select "Automatic" or "Manual" for "Create
Mode".
When "Automatic" is selected, the settings for "Automatic Setting" are displayed.
When "Manual" is selected, the settings for "Manual Setting" are displayed.
4
Set the required items and click the [Create] button. A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [RAID Groups] screen.
4.2.2

Volume Creation

Create volumes in the RAID group. The procedure to create a volume is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volumes] screen appears.
2
In [Action], click [Create].
The [Create Volumes] screen appears.
3
Select "Automatic" or "Manual" for "RAID Group / TPP Selection".
4
Enter the name of the volume that is to be created in "Name", set the required items, and click the
[Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The volume is created and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [Volumes] screen.
34
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0