Fujitsu Eternus DX500 S3 Manuel de configuration - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu Eternus DX500 S3. Fujitsu Eternus DX500 S3 28 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Également pour Fujitsu Eternus DX500 S3 : Manuel de configuration Connexion au serveur (12 pages), Manuel de configuration (13 pages), Manuel de configuration (18 pages), Précautions de sécurité (12 pages)
Imprimer la page
Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX storage systems to a server. The workflow is shown
below.
Workflow
Installing the iSCSI Software Initiator and Setting Up the Server
Set up the OS to connect to the ETERNUS DX.
•
"Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.
"7.2 Setting Up the Server to Recognize the Logical Units" (page 22)
•
Setting Up the Server as Required by the System Configuration
•
Set PV-Links
"Chapter 8 Setting the Multipaths" (page 24)
-
Set Logical Volume Manager (LVM)
•
"3.4 LVM Notes" (page 12)
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX
7
Copyright 2014 FUJITSU LIMITED
P3AM-3402-14ENZ0