Fujitsu ETERNUS DX60 S3 Manuel de planification du site - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de planification du site pour {nom_de_la_catégorie} Fujitsu ETERNUS DX60 S3. Fujitsu ETERNUS DX60 S3 41 pages. Hybrid storage systems, all-flash arrays, power synchronized unit
Également pour Fujitsu ETERNUS DX60 S3 : Manuel de configuration Connexion au serveur (12 pages), Manuel de configuration (28 pages), Manuel de configuration (13 pages), Précautions de sécurité (12 pages)
Imprimer la page
Chapter 1
ETERNUS DX Installation
1.4
Package Size
1.4
Package Size
The ETERNUS DX is shipped in cardboard boxes. These boxes may not fit through some doorways or eleva-
tors. To make sure that the ETERNUS DX can be moved to the installation site, carefully check the transport
route information.
The following table shows the package size and the maximum package weight of each component for re-
gions other than the EMEIA, North American, Central American, and Caribbean regions.
Table 1.2 Package Size (for Regions other than the EMEIA, North American, Central American, and Caribbean Re-
gions)
Component
Controller enclosure
Drive enclosure
Drive (*1)
Power distribution units
*1: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with
the drives preinstalled.
When optional drives are ordered without preinstallation, each drive is shipped in an individual pack-
age.
2.5" type
3.5" type
2.5" type
3.5" type
2.5" drive
3.5" drive
1U
2U
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Site Planning Guide
Copyright 2015 FUJITSU LIMITED
Package size (W ´ D ´ H)
600 ´ 760 ´ 240mm
600 ´ 760 ´ 240mm
600 ´ 660 ´ 240mm
600 ´ 660 ´ 240mm
160 ´ 278 ´ 106mm
189 ´ 300 ´ 116mm
570 ´ 710 ´ 160mm
(390 ´ 590 ´ 180mm) ´ 2
17
Maximum weight
Approximately 40kg
Approximately 40kg
Approximately 40kg
Approximately 40kg
Approximately 0.5kg
Approximately 1.2kg
Approximately 4kg
(Approximately 7kg) ´ 2
P3AM-8982-03ENZ0