Wireless Setup Instructions for Windows
collected, then repeat
Steps 1
you have entered the correct information.
If your access point does not have DHCP
enabled you will need to manually configure the
IP address, subnet mask and gateway of the
machine to suit your network. See the Network
User's Guide for details.
Wireless setup is now complete. A four level
indicator at the top of your machine's LCD will
show the wireless signal strength of your access
point or router.
To install MFL-Pro Suite, continue
Before you install MFL-Pro SuiteaMake sure that
your computer is ON and you are logged on with
Administrator rights.
Important
Before installation, if you are using personal
firewall software (other than Windows® Firewall),
anti-spyware or antivirus applications,
temporarily disable them.
If there are any programs running, close
them.
Make sure there are no memory cards or a
USB Flash memory drive inserted.
The screens may differ depending on the
operating system.
The supplied CD-ROM includes ScanSoft™
PaperPort™ 11SE. This software supports
Windows® 2000 (SP4 or greater), XP (SP2
or greater), XP Professional x64 Edition and
Windows Vista®. Update to the latest
Windows® Service Pack before installing
MFL-Pro Suite.
Install MFL-Pro Suite for Windows
1.
Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
Note: If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then double-
click start.exe.
2.
The CD-ROM main menu will appear. Click
InstallMFL-ProSuite.
to
8
to make sure
2
© 1995 - 2010 Brother International Corporation
www.brother-usa.com
Note
If this screen appears, click OK and restart
your computer.
If the installation does not continue
automatically, open the main menu again by
ejecting and then reinserting the CD-ROM or
double-click the start.exe program from the
root folder, and continue from b to install
MFL Pro Suite.
For Windows Vista®, when the User
Account Control screen appears, click Allow.
When the ScanSoft™ PaperPort™ 11SE
3.
License Agreement window appears, click Yes if
you agree to the Software License Agreement.
Imprimer la page