Fujitsu ETERNUS DX8700 Manuel de l'utilisateur - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu ETERNUS DX8700. Fujitsu ETERNUS DX8700 42 pages. Disk storage system
Également pour Fujitsu ETERNUS DX8700 : Manuel de l'utilisateur (35 pages), Manuel de configuration (28 pages), Manuel de configuration (13 pages)
Imprimer la page
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
6.1.3
Creating the Virtual Switches
Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.
Perform the following procedure to each vmnic that configures iSCSI SAN.
1
Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-
work] in the upper right of the window.
2
Select [VMkernel] and click the [Next] button.
3
Select the checkbox of the target network adapter and click the [Next] button.
4
Set properties of port groups as required, and click the [Next] button.
5
Set the IP address and subnet mask of "VMkernel", and click the [Next] button.
6
Repeat
Step 1
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
through
Step 5
to add another virtual switch (vSwitch2).
22
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0