Fujitsu Eternus DX90 Manuel de l'utilisateur - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu Eternus DX90. Fujitsu Eternus DX90 35 pages. Disk storage system
Également pour Fujitsu Eternus DX90 : Utilisation de produits optionnels (2 pages), Manuel de configuration (16 pages)
Imprimer la page
Chapter 9
Setting Up the Server to Recognize the Logical Units
9.1
Displaying the Recognized Logical Units
"cat" command for LUN display
•
Use the "cat" command to display the "/proc/scsi/scsi" file, which contains a list of recognized SCSI devices.
Check each path of the allocated LUNs.
The following shows an example:
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id:
Vender: FUJITSU
Type:
Host: scsi0 Channel: 00 Id:
Vender: SDR
Type:
Host: scsi1 Channel: 00 Id:
Vender: SEAGATE
Type:
Host: scsi2 Channel: 00 Id:
Vender: FUJITSU
Type:
Host: scsi2 Channel: 00 Id:
Vender: FUJITSU
Type:
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
04 Lun: 00
Model: MAP3735NC
Direct-Access
08 Lun: 00
Model: GEM318
Processor
05 Lun: 00
Model: DAT
Sequential-Access
00 Lun: 00
Model: ETERNUS_DX400
Direct-Access
00 Lun: 01
Model: ETERNUS_DX400
Direct-Access
Copyright 2013 FUJITSU LIMITED
Rev: 5207
ANSI SCSI revision: 03
Rev: 0
ANSI SCSI revision: 02
9SP40-000
Rev: 9M38
ANSI SCSI revision: 03
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
28
P3AM-3842-12ENZ0