Fujitsu Eternus DX90 S2 Manuel de configuration Connexion au serveur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de configuration Connexion au serveur pour {nom_de_la_catégorie} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 13 pages. Server connection. (fibre channel) for aix
Également pour Fujitsu Eternus DX90 S2 : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel (18 pages), Instal Setup (20 pages), Installation du matériel (23 pages), Manuel de configuration (28 pages), Manuel de configuration (15 pages), Manuel de configuration (38 pages)

Imprimer la page
Fujitsu Eternus DX90 S2 Manuel de configuration Connexion au serveur
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Solaris OS, Windows
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, OS, SAS cards, and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names.
This manual references the following documents:
•
ETERNUS Web GUI User's Guide
This manual is designed for use with the following ETERNUS DX storage systems:
ETERNUS DX80 S2/DX90 S2 Disk storage system
•
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes the workflow when setting up an ETERNUS DX.
"Chapter 2 Setting Up the ETERNUS DX" (page 8)
•
This chapter describes how to set up an ETERNUS DX.
3
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
®
, Linux, or VMware ESX via a SAS interface.
Preface
11th Edition
December 2014
P3AM-5352-11ENZ0