Fujitsu ETERNUS8000 900 Manuel - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu ETERNUS8000 900. Fujitsu ETERNUS8000 900 28 pages. Disk storage systems (fibre channel) for oracle solaris
Également pour Fujitsu ETERNUS8000 900 : Manuel (21 pages), Manuel de connexion au serveur (25 pages), Manuel de connexion au serveur (32 pages), Manuel de connexion (19 pages)

Imprimer la page

Chapter 9

9.1

Enabling MPxIO

Enable MPxIO.

Check the [mpxio-disable="no"] line in the "/kernel/drv/iscsi.conf" file.

Change the parameter to "no" when "yes" is set.

Example for changing the "/kernel/drv/iscsi.conf" file:

# To globally enable MPxIO on all iscsi ports set:

# mpxio-disable="no";

# To globally disable MPxIO on all iscsi ports set:

# mpxio-disable="yes";

mpxio-disable="no";

9.2

Reconfiguring and Restarting the Server

Reconfigure and restart the server to effect the new settings.

# touch /reconfigure

# /usr/sbin/shutdown -y -g0 -i6

Use the "format" command to check the MPxIO multipath status after multipathing is set up.

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Setting Up the Multipath Configuration

For the iSCSI LAN (used to transfer data), do not set multipath

configuration with IP Network Multipathing (IPMP).

When configuring the multipath, use MPxIO in the same way as FC-SAN is

used for configuration.

<- Check that no is set.