AEG PowerCare LR86CB86 Manuel de l'utilisateur - Page 35

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG PowerCare LR86CB86. AEG PowerCare LR86CB86 48 pages.

2. Place a suitable bowl below the drain

pump access to collect the water that

flows out.

3. Open the chute downwards. Always

keep a rag nearby to dry up any

water spillages when removing the

filter.

4. Turn the filter 180 degrees in anti-

clockwise direction to open it, without

removing. Let the water flow out.

5. When the bowl is full of water, turn

the filter back and empty the

container.

6. Repeat the steps 4 and 5 until the

water stops to flow out.

7. Turn the filter anti-clockwise to

8. If it is necessary, remove fluff and

9. Make sure that the impeller of the

10. Clean the filter under the water tap.

11. Put the filter back into the special

remove it.

objects from the filter recess.

pump can rotate. If it does not rotate,

contact the Authorised Service

Centre.

guides by turning it clockwise. Make

sure that you tighten the filter

correctly to prevent leakages.

ENGLISH