AEG ProSense 6000 Series Manuel de l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 pages.

Imprimer la page

The programme or the delay start continues.

4. The door can be opened when the

programme is complete, or set spinning

or draining programme/option and than

press Start/Pauze button.

12.12 End of the programme

When the programme has finished, the

appliance stops automatically. The acoustic

signals operate (if they are active).

In the display all washing phase indicators

become steady and the time area shows .

The indicator of the Start/Pauze button goes

off.

The door unlocks and the indicator

off.

1. Press the Aan/Uit button to deactivate the

appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the appliance again,

the display show the end of the last

selected programme. Turn the

programme dial to set a new cycle.

2. Remove the laundry from the appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent mildew

and odours.

5. Close the water tap.

12.13 Draining water out after end

of cycle

If you have chosen a programme or an option

that does not empty out the water of the last

rinse, the programme is completed, but:

• The display shows the door locked

indicator

13. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

• The drum still turns at regular intervals to

prevent the creases in the laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Centrifugeren

button to decrease the spin speed

proposed by the appliance.

2. Press Start/Pauze to continue the cycle

3. When the programme is completed and

the door locked indicator

you can open the door.

4. Press the Aan/Uit button a few seconds

to deactivate the appliance.

goes

In any case, the appliance empties the

water out automatically after

approximately 18 hours.

12.14 Stand-by option

The Stand-by function automatically

deactivates the appliance to decrease the

energy consumption when:

• You do not use the appliance for 5

minutes before you touch the Start/Pauze

button.

Press the button Aan/Uit to activate the

appliance again.

• After 5 minutes from the end of the

washing programme

Press the Aan/Uit button to activate the

appliance again.

The display shows the end of the last set

programme.

Turn the programme dial to set a new

cycle.

If you set a programme or an option that

ends with water in the drum, the Stand-

by function doesn't deactivate the

appliance to remind you to drain the

water.

13.1 The laundry load

• Divide the laundry into: white, coloured,

synthetics, delicates and wool.

goes off,

ENGLISH