AEG ProSense LTR6162 Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG ProSense LTR6162. AEG ProSense LTR6162 36 pages.
Imprimer la page
of 30 minutes up to 90' and from 2 hours up
to 20 h.
The indicator of the option and the indicator
of the set value are on. After touching
theStart/Pauze button the appliance begins
the countdown.
9. SETTINGS
9.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the
Startuitstel and the Tijd besparen buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
9.2 Child Lock
With this option you can prevent children from
playing with the control panel.
• To activate/deactivate this option, touch
the Centrifugeren and the Extra buttons
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
• After you touch the Start/Pauze button: all
the buttons and the programme dial are
deactivated (except Aan/Uit button ).
• Before you touch the Start/Pauze button:
the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.3 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
the Temperatuur button and the
Centrifugeren button simultaneously until
relevant indicator
on display.
comes on/goes off
8.8 Start/Pauze
Touch the Start/Pauze button to start, pause
the appliance or interrupt a running
programme.
9.4 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Startuitstel and Tijd
besparen buttons for some seconds
(within 10 seconds after the switching on.
After these 10 seconds, the key
combination activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
9.5 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the
Synthetica programme (3rd position
clockwise).
ENGLISH
17