AEG ProSense LTR6162 Manuel de l'utilisateur - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG ProSense LTR6162. AEG ProSense LTR6162 36 pages.
Imprimer la page
1. Press button Start/Pauze.
The
indicator goes off.
2. Open the appliance lid.
3. Close the lid and press button Start/
Pauze.
The delay start continues.
11.13 End of cycle
When the programme has finished, the
appliance stops automatically. The acoustic
signal operates (if it is active).
In the display
comes on and the lid locked
indicator
goes off.
The indicator of Start/Pauze button goes off.
1. Press button Aan/Uit to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display show the end of the last set
programme. Turn the programme knob to
set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent mildew and
odours
11.14 Draining water out after end
of cycle
The washing programme is completed,
but there is water in the drum:
The drum turns regularly to prevent the
creases in the laundry.
The lid lock indicator
locked.
12. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
is on. The lid stays
You must drain the water to open the lid:
1. If necessary, decrease the spin speed.
2. Press the Start/Pauze button.
The appliance drains the water and spins.
3. When the programme is completed and
the door lock indicator
can open the door .
4. Press Aan/Uit some seconds to
deactivate the appliance.
The appliance drains and spins
automatically after approximately18
hours.
11.15 AUTO Stand-by option
The AUTO Stand-by function automatically
deactivates the appliance to decrease the
energy consumption when:
• You do not use the appliance for 5
minutes before you press Start/Pauze
button.
Press the button Aan/Uit to activate the
appliance again.
• After 5 minutes from the end of the
washing programme
Press the button Aan/Uit to activate the
appliance again.
The display shows the end of the last set
programme.
Turn the programme knob to set a new
cycle.
If you set a programme or an option that
ends with water in the drum, the AUTO
Stand-by function doesn't deactivate the
appliance to remind you to drain the
water.
12.1 The laundry load
• Divide the laundry into: white, coloured,
synthetics, delicates and wool.
• Follow the washing instructions on the
laundry care labels.
goes off, you
ENGLISH
21