Brother MFC-9440CN Manuel d'installation rapide - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-9440CN. Brother MFC-9440CN 34 pages. Facsimile equipment
Également pour Brother MFC-9440CN : Brochure & Specs (6 pages), Manuel (7 pages), Liste de référence des pièces (43 pages), Nettoyage et entretien (7 pages), Manuel d'installation rapide (34 pages), Manuel de démarrage rapide (10 pages)

Imprimer la page
Brother MFC-9440CN Manuel d'installation rapide
STEP 1
Setting Up the Machine
8
Tone and pulse dialing mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press
Press OK.
5
Press Stop/Exit.
10
or
to select Pulse (or Tone).
9

Dial Prefix

The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
1
Press Menu.
2
Press 0.
3
Press 5 (For Canada, press 6).
4
Press
or
to choose On or Off and
press OK.
Do one of the following:
If you chose On, go to step 5.
If you chose Off, go to step 7.
5
Press 1 or 2 to choose 1.Change or
2.Exit.
Do one of the following:
If you chose 1.Change, go to step 6.
If you chose 2.Exit, go to step 7.
Note
The default setting is "9 ".
6
Enter the prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
• You can use the number 0 to 9 , # ,and !. (Press
Hook to display "!".)
• You cannot use ! with any other numbers or
characters.
• If the pulse dialing mode is on, # and * are not
available to use. (Canada only)
7
Press Stop/Exit.