Brother MFC-J410W Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Brother MFC-J410W. Brother MFC-J410W 35 pages. Quick setup guide - spanish
Également pour Brother MFC-J410W : (anglais) Quick Configuration Guide (35 pages)

Imprimer la page

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash them out with water

at once, and if irritation occurs consult a doctor.

Make sure that the power is turned on.

The LCD shows No Ink Cartridge.

Open the ink cartridge cover a.

Remove the green protective part a.

Note

Do not throw away the green protective part. You

will need it if you transport the machine.

Unpack the ink cartridge.

Note

Make sure you install the Starter Ink Cartridges

included with your machine first.

Turn the green knob on the protective yellow

cap clockwise until it clicks to release the

vacuum seal, then remove the cap a.

Take care to match the color of the lever a

with the cartridge color b, as shown in the

diagram below.

Install each ink cartridge in the direction of the

arrow on the label.