Brother QL-1060N Manuel de l'utilisateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother QL-1060N. Brother QL-1060N 24 pages. Label printer
Également pour Brother QL-1060N : Manuel de l'utilisateur du réseau (42 pages), Manuel de l'utilisateur (42 pages), Manuel de l'utilisateur du logiciel (40 pages), Manuel de l'utilisateur du réseau (48 pages), Manuel de l'utilisateur du logiciel (48 pages), Manuel de l'utilisateur du réseau (41 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (48 pages), Manuel de l'utilisateur (41 pages)

Imprimer la page

Brother QL-1060N Manuel de l'utilisateur

Problem

Cutter error.

The printed bar code cannot be

read.

I want to reset the printer/delete

the data transferred from PC.

(QL-1060N only)

I want to cancel the current

printing job. (QL-1060N only)

• If a cutter error occurs, keep the DK roll compartment cover

closed and press ON/OFF button. The cutter moves back to the

normal position and turns the machine OFF automatically. After

the machine is OFF, inspect the cutter unit and remove the

paper jam.

• Set the label vertical to the print head as shown below.

Label exit slot

Print head

• Some types of scanner are not able to read the bar code. Try

using another scanner.

• We recommend printing the Bar code with Print Quality options

set to "Give priority to print quality".

Windows

XP:

To change the Print Quality options, open the printer properties

from [Control Panel] - [Printer and other hardware] - [Printer and

Faxes], right-clicking the printer whose settings are to be

changed, then selecting [Properties]. Then, in the [General] tab,

click [Printing Preferences...].

Windows Vista

To change the Print Quality options, open the printer properties

by going to [Control Panel] - [Hardware and Sound] - [Printers],

right-clicking the printer whose settings are to be changed, then

selecting [Properties]. Then, in the [General] tab, click

[Printing Preferences...].

Windows

To change the Print Quality options, open the printer properties

by going to

- [Devices and Printers], right-clicking the printer

whose settings are to be changed, and selecting

[Printer properties]. Then, in the [General] tab, click

[Preferences...].

• To reset the machine, press and hold the ON/OFF button to

switch the machine OFF. Then, hold down the ON/OFF button

for two seconds. Continue holding down the ON/OFF button,

and press the CUT button six times. The machine will then

reset. All the transferred data from PC will be deleted and will

reset the machine to factory settings.

• Make sure that the printer is ON, and press the ON/OFF button.

Solution

Recommended

print direction

STEP