Brother 2 Manuel - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Brother 2. Brother 2 39 pages. Hewlett-packard laser printer user guide
Également pour Brother 2 : Manuel de l'utilisateur (15 pages)

Imprimer la page

When trial feeding is finished, the following message

appears. Touch the "OK" key to return to the previous

screen.



If the length of the material is sufficient for the length of the

cutting pattern, only material for the length of the pattern is

fed, and then the material is fed back to the feeding start

position.

If the length of the material is not sufficient for the length of

the cutting pattern, the material is not fed back to the feeding

start position.

Memo

• If the material becomes jammed in the machine, remove

any jammed material. For details, see "When Material Has

Become Jammed in the Machine" on page 31.

• If the material has a strong curl, it will not feed properly. In

that case, flatten the curl in the material, and then load it

again.

Changing the Cutting Start Position

The cutting start position can be moved up or down (in the

feeding direction) to the desired location.

To change the cutting start position, touch

Touch

want to move the material.

"Forward": The material is fed toward the back of the

machine.

"Backward": The material is fed toward the front of the

machine.

Touch

to return to the screen in step

Note

• The material continues to be fed while

is held down.

• If the material is fed to the end while it is fed toward the

back of the machine, the material will no longer be fed by

the feed rollers. If the material is no longer fed by the feed

roller, load it again. For details, see "Feeding the Material"

on page 15.

• If the material is fed toward the front of the machine until

the end of the material is directly under the feed rollers,

feeding stops.

for the direction in which you