AEG ARCTIS Manuel d'utilisation - Page 14

Reversing the Door

The side at which the door opens can be changed from the right side

(factory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the

appliance may not be connected to the mains. Remove plug from the

mains beforehand.

1. Pull base cover forward to

remove and reposition the door

pivot cover from the left to the

right.

2. With door closed screw pivot pin

(A) out of the lower door pivot

and remove washer (B).

3. Remove door carefully to the

front and set aside.

4. Reposition upper pivot pin to the

left side.

5. Pry out cap at upper left of the

door with a small screwdriver

and reposition it to the right

side.

6. Carefully set door into upper

pivot pin and close.