AEG ERT1374 Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG ERT1374. AEG ERT1374 26 pages. Integrating refrigerators

Replacing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the cir-

cuit breaker.

Light bulb specification: 220-240 V, max. 15 W or 25 W (halogen,

depending on model; please note printed information on the transpar-

ent cover).

Fitting: E 14

1. To switch the appliance off press and hold the ON/OFF button until the

mains pilot indicator goes out.

2. Unplug from the mains

3. To change the light bulb, remove the

cross head screw, press on the front

of the light bulb cover as shown in

the figure (arrow) and remove the

light bulb cover from the back.

4. Change the defective light bulb.

5. Refit the light bulb cover and the cross head screw.

The following noises are characteristic of refrigeration appliances:

• Clicks

Whenever the compressor switches on or off, a click can be heard.

• Humming

As soon as the compressor is in operation, you can hear it humming.

• Bubbling/Splashing

When refrigerant flows into thin tubes, you can hear bubbling or

splashing noises. Even after the compressor has been switched off,

this noise can be heard for a short time.