AEG OKO-SANTO 1650-6 TK Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG OKO-SANTO 1650-6 TK. AEG OKO-SANTO 1650-6 TK 24 pages. Larder fridge

Imprimer la page

1. Starting up and Temperature Regulation

Unusual noises.

The compressor does not

start immediately after

changing the temperature

setting.

Water on the floor or on

storage shelves.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the

circuit breaker.

Light bulb data: 220-240 V, max. 15 W

To switch off the appliance, turn the temperature regulator to position

"0".

Unplug the mains plug.

To change the light bulb, undo the

screw.

Press the light bulb cover as shown

and slide it backwards.

Change the defective light bulb.

Refit the light bulb cover and the

screw.

Put the refrigerator back into

operation.

Symptom

Possible Cause

Appliance is not level.

The appliance is touching

the wall or other objects.

A component, e.g. a pipe,

on the rear of the appliance

is touching another part of

the appliance or the wall.

This normal, no error has

occurred.

Water drain hole is

blocked.

AEG65

Remedy

Readjust the feet.

Move the appliance

slightly.

If necessary, carefully bend

the component out of the

way.

The compressor starts after

a period of time.

See the "Cleaning and

Care" section.